李朋,潘邻,张良界,杨闽红,朱云峰,马飞,王成虎.奥氏体不锈钢渗碳层的组织及耐蚀强化性能研究[J].表面技术,2013,42(4):69-71,86.
LI Peng,PAN Lin,ZHANG Liang-jie,YANG Min-hong,ZHU Yun-feng,MA Fei,WANG Cheng-hu.Study on Structure and Corrosion Resistance Analysis of Carburizing Organization of Austenitic Stainless Steel[J].Surface Technology,2013,42(4):69-71,86
奥氏体不锈钢渗碳层的组织及耐蚀强化性能研究
Study on Structure and Corrosion Resistance Analysis of Carburizing Organization of Austenitic Stainless Steel
投稿时间:2013-02-20  修订日期:2013-03-14
DOI:
中文关键词:  奥氏体不锈钢  低温气体渗碳  耐蚀强化  渗碳组织
英文关键词:austenitic stainless steel  gas carburizing at low temperature  corrosion strengthen  carburized structure
基金项目:国家自然科学基金(50975210)
作者单位
李朋 武汉材料保护研究所, 武汉 430030 
潘邻 武汉材料保护研究所, 武汉 430030 
张良界 武汉材料保护研究所, 武汉 430030 
杨闽红 武汉材料保护研究所, 武汉 430030 
朱云峰 武汉材料保护研究所, 武汉 430030 
马飞 武汉材料保护研究所, 武汉 430030 
王成虎 江苏海纳机电集团有限公司, 扬中 212216 
AuthorInstitution
LI Peng Wuhan Research Institute of Materials Protection, Wuhan 430030 , China 
PAN Lin Wuhan Research Institute of Materials Protection, Wuhan 430030 , China 
ZHANG Liang-jie Wuhan Research Institute of Materials Protection, Wuhan 430030 , China 
YANG Min-hong Wuhan Research Institute of Materials Protection, Wuhan 430030 , China 
ZHU Yun-feng Wuhan Research Institute of Materials Protection, Wuhan 430030 , China 
MA Fei Wuhan Research Institute of Materials Protection, Wuhan 430030 , China 
WANG Cheng-hu Jiangsu Haina Mechanical & Electric Equipment Group Co. , Ltd. , Yangzhong 212216 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      针对常规渗碳工艺会削弱奥氏体不锈钢耐蚀性的问题,通过对现有气体渗碳技术进行改进,采用前处理活化、降低渗碳温度的方法,实现了奥氏体不锈钢渗碳兼顾表面强度与耐蚀性能的目标。 采用该工艺对AISI304 和 AISI316 奥氏体不锈钢进行渗碳处理,并分析渗层组织和性能,结果表明,在 470 ℃ 条件下,AISI316 不锈钢经气体渗碳处理后,渗碳层具有优异的耐蚀强化性能。
英文摘要:
      In view of the conventional carburization weakening austenitic stainless steel corrosion resistance problem, based on the existing gas carburizing technology was improved, using pretreatment activation, carburizing temperature reduction methods, realized the austenitic stainless steel carburized surface strength and corrosion resistant properties of the target . Using this process on AISI304 , AISI316 austenitic stainless steel carburizing processing, and get the austenitic stainless steel for low temperature carburizing organization performance carries on the analysis and research, research shows that under the condition of 470 ℃ , AISI316 stainless steel carburization treated by low temperature gas carburizing layer has excellent corrosion resistance improved performance.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第23361129位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号