| LIAN Guo-fu,QUE Lin-zhi,CAO Qiang,ZENG Jia-yi.Effect of CeO2 Content on Microstructure and Properties of Ni45A+TiC Composite Coatings by Laser Cladding[J],52(11):448-456 |
| Effect of CeO2 Content on Microstructure and Properties of Ni45A+TiC Composite Coatings by Laser Cladding |
| Received:August 29, 2022 Revised:March 13, 2023 |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2023.11.039 |
| KeyWord:laser cladding Ni45A-TiC-CeO2 composite coating rare-earth-oxides CeO2 microstructure |
| Author | Institution |
| LIAN Guo-fu |
School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou , China |
| QUE Lin-zhi |
School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou , China |
| CAO Qiang |
School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou , China |
| ZENG Jia-yi |
School of Mechanical and Automotive Engineering, Fujian University of Technology, Fuzhou , China |
|
| Hits: |
| Download times: |
| Abstract: |
| The tool edge layer needs to have high hardness and wear resistance while the internal organization of the edge is required to be free of defects such as pores and cracks. However, due to the rapid heating and cooling rates in the laser cladding process, there are large thermal and phase change stresses in the cladding layer, and there are differences in physical and chemical properties between the enhanced phase and the base material, which can lead to defects such as coarse grains, pores and cracks in the cladding layer, thus the application of laser cladding technology in tool edge manufacturing is severely limited. |
| Close |
|
|
|