| FENG Yan-rong,ZHOU Liang,JIA Hong-yao,ZHANG Xiang,ZHAO Li-bin,FANG Da-qing.Research Progress on Micro-arc Oxidation of Medical Magnesium Alloy[J],52(7):11-24 |
| Research Progress on Micro-arc Oxidation of Medical Magnesium Alloy |
| |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2023.07.002 |
| KeyWord:medical magnesium alloy micro-arc oxidation film formation mechanism corrosion resistance biocompatibility |
| Author | Institution |
| FENG Yan-rong |
School of Materials Science and Engineering, Chang'an University, Xi'an , China |
| ZHOU Liang |
School of Materials Science and Engineering, Chang'an University, Xi'an , China |
| JIA Hong-yao |
School of Materials Science and Engineering, Chang'an University, Xi'an , China |
| ZHANG Xiang |
School of Materials Science and Engineering, Chang'an University, Xi'an , China |
| ZHAO Li-bin |
Shanxi Yinguang Huasheng Magnesium Co., Ltd., Shanxi Yuncheng , China |
| FANG Da-qing |
State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an , China |
|
| Hits: |
| Download times: |
| Abstract: |
| Magnesium alloy is a highly promising biodegradable metal material for biomedical use, with the advantages of density and elastic modulus similar to those of human bone, reducing the stress-shading effect of bone implants, avoiding osteoporosis and promoting new bone growth. In addition, magnesium alloy also has good machinability, castability and fracture toughness at high temperature, which is more advantageous than other materials for biomedical materials. However, the defects of magnesium alloy as an implant material are that its corrosion rate in body fluids is too fast. Therefore, degradation rate is not easy to control, and the mechanical properties of the implant are greatly reduced, which is not enough to support human bone healing. To address this issue, the surface treatment is necessary to achieve degradation control and improve mechanical properties, corrosion resistance, biocompatibility and antibacterial properties of magnesium alloys. Among the surface technologies, micro-arc oxidation has the advantages of simple pretreatment, uniform film formation, high bonding strength with matrix and enhanced biocompatibility of magnesium alloys. Currently, there are few reviews on micro-arc oxidation technology of magnesium alloys. In this work, the formation mechanism and structure of micro-arc oxide film on magnesium alloy were summarized from the perspective of spark discharge theory. On this basis, from the classification of the affecting parameters of micro-arc oxidation, the effects of pretreatment, electrolyte, additives, electrical parameters (voltage, current mode and pulse frequency) and sealing technology on the corrosion resistance and biocompatibility of magnesium alloy micro-arc oxidation film were expounded combined with the research status in China and abroad. Thus, the research progress of micro-arc oxidation technology for medical magnesium alloys was introduced by studying the affecting parameters. Herein, the work mainly focused on the analysis of the type and concentration of electrolytes and additives on the membrane and biological properties of the mechanism, in which electrolytes included alkaline silicate and phosphate electrolyte and additives included glycerol, fluoride, hydroxyapatite and nanoparticles, etc. It was found that the addition of alkaline phosphate electrolyte could reduce the corrosion rate of the film and promote the process of bone integration and cell attachment. Besides, hydroxyapatite, Ca, P and other bioactive particles as additives could significantly improve the corrosion resistance and biocompatibility of the film. Last but not least, according to the further research, it was found that the affecting factors of process parameters on the micro-arc oxide film layer were not single linear. No matter the process parameters were lower than the minimum value or higher than the maximum value, the performance of the film would be damaged to some extent. From this perspective, it is necessary for researchers to strike an optimal balance between corrosion resistance and biocompatibility. At present, compared with other surface technologies, there is a lack of comprehensive and profound explanation of its film formation mechanism due to the complexity of micro-arc oxidation. Therefore, it is urgent to establish a rich and scientific mechanism research system. Finally, in view of the existing problems, the application of micro-arc oxidation in medical magnesium alloys is prospected. |
| Close |
|
|
|