| CHEN Si-an,ZHU Ben-feng,ZHANG Mu-xuan,LU Xiao-yi,YANG Yu-meng,WEI Guo-ying.Preparation and Properties of Transparent and Wear-resistant Hydrophobic Silicone Modified Acrylic Resin[J],52(3):345-351 |
| Preparation and Properties of Transparent and Wear-resistant Hydrophobic Silicone Modified Acrylic Resin |
| |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2023.03.032 |
| KeyWord:transparency wear-resisting hydrophobic organic silicon acrylic resin |
| Author | Institution |
| CHEN Si-an |
College of Materials and Chemistry, China Jiliang University, Hangzhou , China |
| ZHU Ben-feng |
College of Materials and Chemistry, China Jiliang University, Hangzhou , China |
| ZHANG Mu-xuan |
College of Materials and Chemistry, China Jiliang University, Hangzhou , China |
| LU Xiao-yi |
College of Materials and Chemistry, China Jiliang University, Hangzhou , China |
| YANG Yu-meng |
College of Materials and Chemistry, China Jiliang University, Hangzhou , China |
| WEI Guo-ying |
College of Materials and Chemistry, China Jiliang University, Hangzhou , China |
|
| Hits: |
| Download times: |
| Abstract: |
| With the rapid development of the photovoltaic industry, maintaining the optimal performance of such energy devices has become an important issue. In order to improve the self-cleaning and scratch resistance of photovoltaic solar panels in outdoor environments, this paper prepared silicone modified acrylic resins with transparent hydrophobic and wear-resistant properties by free radical polymerization using three acrylic monomers, including methyl methacrylate (MMA), hydroxyethyl methacrylate (HEMA), butyl acrylate (BA), and silane coupling agent (KH570) as raw materials. After that, hydroxyl silicone oil is added to cross-link and cure it to enhance the mechanical properties. Single-factor experiments were conducted to optimize the ratio of monomer and curing agent. We focused on the contact angle, adhesion, hardness, light transmittance and friction resistance of the copolymer coating after the optimization of process parameters. TENSOR27 was used to conduct Fourier infrared (FT-IR) test on the resulting copolymer to characterize the occurrence of copolymerization reaction by the change of functional groups, and the contact angle was measured by JC2000DF contact angle measuring instrument to characterize the hydrophobicity of the copolymer coating. The hardness and adhesion of the copolymer coating were measured qualitatively by QHQ-A pencil hardness tester test and Cross-Cut Tester respectively. The transmittance of the coating in the visible wavelength band was tested with a Lambda 750S UV-Vis NIR spectrophotometer. The friction resistance of the coating was characterized by measuring the change of contact angle after different friction times. Finally, the impedance of the coating film was measured with a CHI660D electrochemical workstation to obtain its dense properties. The results showed that the silicone monomer was successfully copolymerized with acrylic monomer, and the best process parameters obtained after single-factor experiments were:methyl methacrylate (MMA) 7.6 g, butyl acrylate (BA) 2.4 g, hydroxyethyl methacrylate (HEMA) 1.0 g, silane coupling agent (KH570) 1.0 g and 0.1 g of hydroxy silicone oil. The copolymer coating obtained after single-factor optimization has a contact angle of 106.7° and possesses good hydrophobicity. The bonding force between the coating and the substrate is 0 and the hardness is H, showing excellent mechanical properties. The highest light transmission rate of the resin coated on the glass substrate is 92.08% in the visible wavelength band, with certain transmission enhancement performance. Meanwhile, the coating has good abrasion resistance and denseness. Therefore, we can see that the copolymerization of silane coupling agent (KH570) and acrylic monomer makes the long chain in the silane coupling agent (KH570) obviously enhance the hydrophobicity and stability of the copolymer, and enhance the mechanical properties and stability of the coating after cross-linking and curing. Because the refractive index of each added monomer is <1.5, the coating exhibits certain permeability enhancement properties. |
| Close |
|
|
|