| JIN Zi-ang,ZHU Li-na,LIU Ming,WANG Hai-dou,KANG Jia-jie,MA Guo-zheng.Research Status of Aluminum Coating Prepared by Thermal Spraying Technology and Its Corrosion Resistance in 3.5%NaCl Solution[J],48(10):220-229 |
| Research Status of Aluminum Coating Prepared by Thermal Spraying Technology and Its Corrosion Resistance in 3.5%NaCl Solution |
| Received:March 01, 2019 Revised:October 20, 2019 |
| View Full Text View/Add Comment Download reader |
| DOI：10.16490/j.cnki.issn.1001-3660.2019.10.027 |
| KeyWord:thermal spraying technology aluminum coating porosity corrosion resistance corrosion mechanism |
| Author | Institution |
| JIN Zi-ang |
1.School of Engineering and Technology, China University of Geosciences Beijing, Beijing , China |
| ZHU Li-na |
1.School of Engineering and Technology, China University of Geosciences Beijing, Beijing , China |
| LIU Ming |
2.National Key Lab for Remanufacturing, Army Academy of Armored Forces, Beijing , China |
| WANG Hai-dou |
1.School of Engineering and Technology, China University of Geosciences Beijing, Beijing , China; 2.National Key Lab for Remanufacturing, Army Academy of Armored Forces, Beijing , China |
| KANG Jia-jie |
1.School of Engineering and Technology, China University of Geosciences Beijing, Beijing , China |
| MA Guo-zheng |
2.National Key Lab for Remanufacturing, Army Academy of Armored Forces, Beijing , China |
|
| Hits: |
| Download times: |
| Abstract: |
| Aluminum is a widely used corrosion-resistant material. As one of the important technologies in the field of surface engineering, thermal spraying technology can be used to prepare aluminum coatings on the surface of mild steel to provide corrosion-resistant protection, prolong the service life of mild steel, and reduce the maintenance. At present, flame spraying technology, arc spraying technology and cold spraying technology are commonly used to prepare aluminum coatings. The characteristics and corrosion resistance of aluminum coatings prepared by these three thermal spraying technologies were reviewed. The influence mechanism of heat source temperature, particle flying speed and spraying distance on the characteristics of the coatings and the corrosion resistance mechanism of the aluminum coatings in 3.5%NaCl solution were systematically summarized. It was found that the pore content in the aluminum coating was the most important factor affecting the corrosion resistance. The pore content could be expressed by the porosity and the corrosion resistance of the aluminum coating decreased with the increase of the porosity. However, the effects of different contents of pore and the different shapes and sizes of pore on corrosion resistance were not pointed out in detail. Therefore, it is of great scientific significance for the practical application of thermal spraying aluminum coatings in the future and is one of the key research directions in the future to further optimize the process of preparing aluminum coatings by thermal spraying technology and to study the specific corrosion resistance of aluminum coatings with different content of pores and pores of different shapes and sizes under actual service conditions. |
| Close |
|
|
|