| WANG Yu-xiang,ZHOU Su_min,PAN Cheng,YIN Rong-rong.Effect of Electroless Ni-P Plating on the Surface Roughness of the Workpiece[J],36(3):76-77 |
| Effect of Electroless Ni-P Plating on the Surface Roughness of the Workpiece |
| Received:October 31, 2006 Revised:June 10, 2007 |
| View Full Text View/Add Comment Download reader |
| DOI： |
| KeyWord:Electroless plating Surface roughness Influence factor |
| Author | Institution |
| WANG Yu-xiang |
1. Nanjing University of Technology, Nanjing , China;2. Huaiyin Institute of Technology, Huaian , China |
| ZHOU Su_min |
Huaiyin Institute of Technology, Huaian , China |
| PAN Cheng |
Huaiyin Institute of Technology, Huaian , China |
| YIN Rong-rong |
Huaiyin Institute of Technology, Huaian , China |
|
| Hits: |
| Download times: |
| Abstract: |
| Surface roughness is an important factor that affects the function of the workpiece. Cutting down the workpieces surface roughness degree can improve the mechanical function of the workpieces surface. In order to master the regularity of the workpiece s surface roughness which is plated, in the same kind of the Ni-P plate liquid, we plate the same thickness to the workpieces which have the different surface roughness. By contrasting the data, we find the surface roughness decreased after plating. By analyzing the microcomic shape of the electroless platings surface,we find the reason of the surface roughness decreasing is that the sediment area of the wave through and wave crest is changed. After calculating, so we can conclude that the higher the original workpiece s surface roughness degree is , the more that reduction is. The range of the reduction is about 11 percent of the original workpieces surface roughness degree. |
| Close |
|
|
|