CHEN Xin,PAN Gong-pei,YANG Li-fei,ZHAO Jun,CAO Chuan_xin,XU Jing-xing.Study on the 8mm Microwave Interference Capability of Metallized Bamboo Fibre[J],36(3):17-19 |
Study on the 8mm Microwave Interference Capability of Metallized Bamboo Fibre |
Received:September 12, 2006 Revised:June 10, 2007 |
View Full Text View/Add Comment Download reader |
DOI: |
KeyWord:8mm microwave interference capability Bamboo fibre Metallization Electroless copper plating Electroless nickel plating Microwave interference material |
Author | Institution |
CHEN Xin |
Chemical Engineering School, Nanjing University of Science and Technology, Nanjing , China |
PAN Gong-pei |
Chemical Engineering School, Nanjing University of Science and Technology, Nanjing , China |
YANG Li-fei |
Chemical Engineering School, Nanjing University of Science and Technology, Nanjing , China |
ZHAO Jun |
1. Chemical Engineering School, Nanjing University of Science and Technology, Nanjing , China;2.4th Department, Institute of Chemical Defense and Technology, Beijing , China |
CAO Chuan_xin |
Engineering Institute of Engineering Corps, PLA Univ. of Sci. and Tec. Nanjing , China |
XU Jing-xing |
Chemical Engineering School, Nanjing University of Science and Technology, Nanjing , China |
|
Hits: |
Download times: |
Abstract: |
Bamboo fibre was metallized by electroless copper plating and electroless nickel plating to prepare a new type light microwave interference material. The 8mm microwave attenuation capability of metallized bamboo fibre was tested and the result shows that the attenuation decibel of 20mg copper plating sample reaches 17. SdB and 30mg nickel plating sample reaches 24. 2dB. The plating technology has effect on attenuation capability of sample. The attenuation decibel of same sample increases with its dosage. The test result indicates that metallized bamboo fibre is a new type hopeful microwave interference material. |
Close |
|
|
|