谈素芬,鲁钢.UV 色漆的光引发剂选择[J].表面技术,2013,42(5):103-106.
TAN Su-fen,LU Gang.Photoinitiator Selection of UV Paint[J].Surface Technology,2013,42(5):103-106
UV 色漆的光引发剂选择
Photoinitiator Selection of UV Paint
投稿时间:2013-05-31  修订日期:2013-06-18
DOI:
中文关键词:  环氧大豆油丙烯酸酯  UV 色漆  光引发剂
英文关键词:epoxidized soybean oil acrylate resins  UV paints  photoinitiator
基金项目:
作者单位
谈素芬 南京工业大学, 南京 210009 
鲁钢 南京工业大学, 南京 210009 
AuthorInstitution
TAN Su-fen Nanjing University of Technology, Nanjing 210009 , China 
LU Gang Nanjing University of Technology, Nanjing 210009 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      以环氧大豆油丙烯酸酯为主体树脂,以钛白、铁红、炭黑作为颜填料,配制白、红、黑三种 UV 色漆,考察了四种单一光引发剂及其复配组合对涂膜硬度、附着力和甲乙酮浸泡质量损失率等性能的影响。 结果表明:在白色、红色、黑色体系中,分别以 Irgacure184 与 Irgacure819 质量比为 1 : 2 ,Irgacure184 与 Irgacure907 质量比为 4 : 1 ,以及 Irgacure184 ,Irgacure907 和 ITX 质量比为 1 : 4 : 1 ,为效果最好的引发剂组合。
英文摘要:
      The white, red and black UV paints were prepared by with epoxidized soybean oil acrylate resins as its main resin and the titanium dioxide, iron oxide red or carbon as its pigment respectively. The influences of kinds of photoinitiators,their compounding on the curing effect,hardness and adhension of the final coating films were studied. The results indicate that Irgacure 184 with respect to the mass ratio of 1 : 2 Irgacure 819 triggered effect is best in the white system and Irgacure 184 and Irgacure 907 mass ratio of 1 : 2 have a high initiator in the red system, Irgacure 184 and Irgacure 907 and ITX is 1 : 4 : 1 which is the best initiator composition in the black system.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第24164113位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号