赵昌龙,杜伟龙,于子策,张自豪,白宇阳,张书豪,董博,杨俊宝.超声辐射对激光熔覆Ni基WC涂层性能的影响[J].表面技术,2024,53(23):228-241.
ZHAO Changlong,DU Weilong,YU Zice,ZHANG Zihao,BAI Yuyang,ZHANG Shuhao,DONG Bo,YANG Junbao.Effect of Ultrasonic Radiation on the Properties of Laser Melted Ni-based WC Coatings[J].Surface Technology,2024,53(23):228-241 |
| 超声辐射对激光熔覆Ni基WC涂层性能的影响 |
| Effect of Ultrasonic Radiation on the Properties of Laser Melted Ni-based WC Coatings |
| 投稿时间：2024-01-05 修订日期：2024-05-28 |
| DOI：10.16490/j.cnki.issn.1001-3660.2024.23.020 |
| 中文关键词: 激光熔覆 超声波辐射 材料表征 残余应力 工艺参数 |
| 英文关键词:laser cladding ultrasonic radiation material characterization residual stress process parameters |
| 基金项目:吉林省自然科学基金(20240101088JC) |
|
|
| Author | Institution |
| ZHAO Changlong | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
| DU Weilong | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
| YU Zice | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
| ZHANG Zihao | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
| BAI Yuyang | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
| ZHANG Shuhao | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
| DONG Bo | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
| YANG Junbao | School of Mechanical and Vehicle Engineering, Changchun University, Changchun 130022, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研究不同振幅超声波辐射对激光熔覆Ni基WC涂层组织结构及力学性能的影响规律，为降低熔覆层残余应力，提高熔覆层力学性能，提升零部件服役寿命提供技术支持。方法 在Cr12MoV模具钢表面激光熔覆Ni基WC涂层，将激光熔覆技术与超声波辐射技术相结合，以消除熔覆层中存在的裂纹和气孔等缺陷，提高成形工件的力学性能。首先，基于超声波在金属凝固过程中的空化效应和声流效应，结合晶粒生长规律，研究振幅参数对熔池和熔覆层宏观形貌、微观组织结构和物相组成的影响。其次，通过涂层硬度和耐磨性等对比试验分析超声辐射工艺对熔覆层力学性能的影响。最后，利用X-RAYS衍射仪测量熔覆层的纵向残余应力，探究超声辐射对熔覆层应力的影响，并解释超声波辐射增强熔覆层性能的作用机理。结果 不同振幅超声辐射熔覆层的平均晶粒尺寸最大降低66.47%，显微组织主要由柱状晶和等轴晶组成，涂层物相主要是Ni-Cr-Fe和γ-(Fe, Ni)固溶体。磨损量分别降低了65.17%、95.74%、96.49%、76.67%、73.03%。熔覆层的平均显微硬度分别提高了14.86%、23.20%、28.10%、22.84%、16.76%，平均残余应力降低173.0 MPa，最大降幅点可达95.31%。结论 超声波辐射有效降低了熔覆层残余应力和裂纹的产生，提高了熔覆层质量，进而增加零部件的使用寿命。随着超声波辐射振幅的提高，熔覆层表面粗糙度降低，显微硬度和耐磨性先提高、后降低，残余应力显著降低。综合判断，振幅为14 µm的涂层晶粒细化程度最高，硬度和耐磨性最好。 |
| 英文摘要: |
| Based on the high processing efficiency and effective surface modification of laser cladding, ultrasonic radiation has been introduced to support the study of the effect of ultrasonic waves of different amplitudes on the microstructure and mechanical properties of laser cladding Ni-based WC coatings. The work aims to reduce the residual stress of the cladding coating, improve the mechanical properties of the cladding coating and improve the service life of parts to provide technical support. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号