吴安琪,刘长松,纪学成,栗心明.仿生混合润湿图案表面的制备及其水收集性能[J].表面技术,2024,53(14):190-198.
WU Anqi,LIU Changsong,JI Xuecheng,LI Xinming.Fabrication and Water Collection Performance of Biomimetic Patterned Surface with Hybrid Wettability[J].Surface Technology,2024,53(14):190-198 |
| 仿生混合润湿图案表面的制备及其水收集性能 |
| Fabrication and Water Collection Performance of Biomimetic Patterned Surface with Hybrid Wettability |
| 投稿时间：2023-08-15 修订日期：2023-10-31 |
| DOI：10.16490/j.cnki.issn.1001-3660.2024.14.018 |
| 中文关键词: 仿生技术 混合润湿性 氨腐蚀法 硫醇局部改性 集水性能 路径储存 |
| 英文关键词:biomimetic hybrid wettability ammonia corrosion method local modification of mercaptan water collection performance path-planned storage |
| 基金项目:山东省高等学校青创科技支持计划项目(2019KJB010);国家自然科学基金面上项目(51875299) |
|
|
| Author | Institution |
| WU Anqi | School of Mechanical and Automotive Engineering, Qingdao University of Technology, Shandong Qingdao 266520, China |
| LIU Changsong | School of Mechanical and Automotive Engineering, Qingdao University of Technology, Shandong Qingdao 266520, China |
| JI Xuecheng | School of Mechanical and Automotive Engineering, Qingdao University of Technology, Shandong Qingdao 266520, China |
| LI Xinming | School of Mechanical and Automotive Engineering, Qingdao University of Technology, Shandong Qingdao 266520, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 全球淡水资源短缺，高效和环保地获取淡水是一项重大挑战。方法 受沙漠甲虫和叶脉的启发，采用氨腐蚀法在铜网表面生长一层氢氧化铜纳米带，随后在氢氧化铜表面覆盖掩膜，使局部附着正十二烷基硫醇分子，制备出仿生混合润湿图案表面，采用接触角测量仪、扫描电子显微镜(SEM)、X射线衍射仪(XRD)及傅里叶变换红外光谱仪(FT-IR)分别对样品的润湿性、表面形貌及化学成分进行分析，以仿生混合润湿图案表面为基础搭建雾水收集装置，模拟潮湿环境来表征样品的水收集速率及样品在不同恶劣环境下的稳定性。结果 在亲水表面构建疏水图案为后续实验提供了基础，所制备的仿生混合润湿图案表面与原始表面、亲水表面、超疏水表面的集水速率相比分别提高了146%、111%、61%，有效提高了集水速率，水收集速率与图案尺寸、图案间隔成反比关系，与图案形状无关。仿生混合润湿图案表面经过紫外线照射和100 ℃加热处理后，仍保持稳定的集水性能。结论 样品具有制备简单、成本低廉、高效耐用等优点，在大气集水中具有潜在的应用前景，有望为解决水资源短缺问题提供新思路。 |
| 英文摘要: |
| Freshwater is an indispensable resource for human survival, but it is exacerbated by uneven distribution, wanton waste and pollution of water resources. Billions of people around the world are currently facing severe water scarcity, a problem that remains an unanswered problem affecting life in arid and semi-arid regions. The back of the beetle has a hybrid wettability patterned gradient consisting of a series of hydrophilic patterns distributed on the hydrophobic surface. The mist condenses in the hydrophilic area of the beetle's back, sheds over time into the superhydrophobic area, and then enters the beetle's mouth. Inspired by it, the surface with the hybrid wettability gradient prepared in this paper is different from the beetle surface in that the pattern of this sample is composed of a series of hydrophobic pattern groups distributed on the hydrophilic surface. The pretreated copper mesh was placed in 1.5 mol/L sodium hydroxide solution and 0.05 mol/L ammonium persulfate solution for 30 min, and its surface was uniformly covered with a layer of copper hydroxide nanoribbons. The copper hydroxide on the surface presented a three-dimensional rough structure, mainly weed-like at the tip, forming a hydrophilic surface with a contact angle of 60°; Subsequently, 0.05 mol/L n-dodecyl mercaptan (96%)/ethanol solution was selectively brushed on the hydrophilic surface of copper hydroxide, resulting in the surface morphology of the brushed area changing from tip weed-like to round-ended aquatic grass, forming a superhydrophobic region with a contact angle of 150°, and a wettability surface with biomimetic hybrid patterned was prepared. The wettability, surface topography and chemical composition of the samples were analyzed by contact angle measuring instrument, scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The mist water collection device was built on the basis of the wettability surface with biomimetic hybrid patterns, which simulated the humid environment to characterize the water collection efficiency of the sample and the stability of the sample in different harsh environments. In the water collection process, the collected water droplets were intercepted by the hydrophobic area, and then converge in the hydrophilic area of the vertical striped leaf vein path to form a hydrophilic leaf vein area, and with the passage of water collection time, a leaf vein-like water film was formed, which reduced the time for water droplet transportation, collection, and dripping. The construction of hydrophobic patterns on the hydrophilic surface provided a new idea for subsequent experiments. Compared with the original surface, the hydrophilic surface and the superhydrophobic surface, the water collection rate of the prepared bionic mixed wetting pattern surface was increased by 146%, 111% and 61%, respectively, and the water collection rate was inversely proportional to the size and spacing of the pattern. It had nothing to do with the pattern shape. In addition, after ultraviolet irradiation and 100 °C heat treatment, the biomimetic patterned surface with hybrid wettability still maintained stable water collection performance. This showed that the function of the sample would not be affected when used outdoors for a long time, thus providing a solid basis for the prepared sample to collect water efficiently in the actual environment. The sample has the advantages of simple preparation, low cost, high efficiency and durability, and has a potential application prospect in atmospheric water collection, which is expected to provide a solution to the shortage of water resources. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号