高臻荣,候果源,任思明.MoS2/Ti-WC纳米多层薄膜结构设计及其宽温域摩擦性能研究[J].表面技术,2024,53(11):80-89, 170.
GAO Zhenrong,HOU Guoyuan,REN Siming.Structure Design and Tribological Properties of MoS2/Ti-WC Nano-multilayer Films with Environmental Adaptability in Wide Temperature Range[J].Surface Technology,2024,53(11):80-89, 170
MoS2/Ti-WC纳米多层薄膜结构设计及其宽温域摩擦性能研究
Structure Design and Tribological Properties of MoS2/Ti-WC Nano-multilayer Films with Environmental Adaptability in Wide Temperature Range
投稿时间:2023-05-09  修订日期:2023-11-06
DOI:10.16490/j.cnki.issn.1001-3660.2024.11.007
中文关键词:  磁控溅射  MoS2/Ti-WC纳米多层薄膜  环境适应性  高温润滑性能  摩擦磨损
英文关键词:magnetron sputtering  MoS2/Ti-WC nano-multilayer film  environmental adaptability  high-temperature lubrication performance  friction and wear
基金项目:国家自然科学基金(52375220)
作者单位
高臻荣 中国科学院宁波材料技术与工程研究所 海洋关键材料重点实验室,浙江 宁波 315201;浙江工业大学 材料科学与工程学院,杭州 310014 
候果源 中国科学院宁波材料技术与工程研究所 海洋关键材料重点实验室,浙江 宁波 315201;宁波大学 机械工程与力学学院,浙江 宁波 315211 
任思明 中国科学院宁波材料技术与工程研究所 海洋关键材料重点实验室,浙江 宁波 315201 
AuthorInstitution
GAO Zhenrong Key Laboratory of Advanced Marine Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Zhejiang Ningbo 315201, China;Collage of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China 
HOU Guoyuan Key Laboratory of Advanced Marine Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Zhejiang Ningbo 315201, China;College of Mechanical Engineering and Mechanics, Ningbo University, Zhejiang Ningbo 315211, China 
REN Siming Key Laboratory of Advanced Marine Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Zhejiang Ningbo 315201, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 探究环境温度对MoS2/Ti-WC纳米多层薄膜摩擦磨损性能的影响探讨并揭示薄膜在高温环境下的损伤机理。方法 采用非平衡磁控溅射技术制备MoS2/Ti-WC纳米多层薄膜评价TiWC双功能组元以及纳米多层结构设计对薄膜表面形貌和微观结构的影响。利用X射线衍射仪(XRD)、扫描电镜(SEM)、扫描探针显微镜(SPM)等表征手段对薄膜的晶体结构、表截面形貌以及表面粗糙度进行分析利用原位纳米压痕仪对薄膜的力学性能进行评估利用高温摩擦磨损试验机评价薄膜在不同温度环境(25~300 ℃)下的摩擦磨损性能进一步通过激光共聚焦对磨痕和磨斑进行光学形貌分析并利用能谱仪(EDS)和共聚焦显微拉曼光谱(Micro-Raman)对钢配副表面的摩擦转移膜进行成分分析。最终揭示MoS2/Ti-WC纳米多层薄膜在不同温度下的磨损机理。结果 MoS2/Ti-WC纳米多层的结构设计可以诱导MoS2 (002)晶面的择优生获得表面平整光滑、结构致密的薄膜。相比于MoS2/Ti薄膜,WC纳米层的引入赋予薄膜更高的硬度和硬/弹比。MoS2/Ti-WC纳米多层薄膜在潮湿空气中的平均摩擦因数为0.07,平均磨损率为6.14×10–7 mm3/(N.m)结论 MoS2/Ti-WC纳米多层薄膜在宽温域(100~300 ℃)内保持稳定的摩擦性能这得益于薄膜纳米多层的结构设计、高的硬/弹比以及优异的抗氧化性能同时在钢配副表面形成了连续且致密的转移膜。
英文摘要:
      The rapid advancement of machinery industry has spurred a heightened demand for mechanical equipment components that can withstand extreme conditions, including high speed, heavy load, and elevated temperature. Solid lubricating films, such as MoS2, have emerged as pivotal technologies in enhancing the longevity of such components. However, traditional MoS2 coatings are susceptible to oxidation when exposed to atmospheric or humid conditions. Consequently, there is an urgent imperative to develop a new type of MoS2-based functional protective film that offers resilience against harsh environment while simultaneously exhibiting low friction and wear characteristics, thereby ensuring prolonged safety and reliability of critical mechanical elements during operation. In response to this critical need, the work aims to fabricate MoS2/Ti-WC nano-multilayer films by non-equilibrium magnetron sputtering technology and examine the impact of Ti and WC bifunctional components, as well as the structure of nano-multilayer film structure on the crystal structure of MoS2. Various characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), scanning probe microscopy (SPM), were employed to meticulously analyze the crystal structure, surface cross section morphology, and surface roughness of the films. Furthermore, the mechanical properties of the films were evaluated with an in-situ nano-indentation instrument, while their friction and wear performance at different temperature (ranging from 25 ℃ to 300 ℃) were assessed by a high-temperature friction and wear test machine. The optical morphology of the wear scar and wear debris was analyzed with laser confocal microscopy. The composition of the friction transfer film on the steel surface was investigated with energy dispersive spectrometer (EDS) and confocal micro-Raman spectroscopy (Micro-Raman). The wear mechanism at high temperature was also discussed. The structure design of MoS2/Ti-WC nano-multilayers could induce preferential growth of the MoS2 (002) crystal plane, resulting in a film with a smooth surface and dense structure. Compared to the MoS2/Ti film, the inclusion of WC nanolayers conferred higher hardness (~9.99 GPa) and a hardness-to-elasticity ratio of 0.090 to the film. MoS2/Ti-WC nano-multilayer films exhibited an average friction coefficient of 0.07 and an average wear rate of 6.14×10–7 mm3/(N.m) in humid air conditions. At temperature ranging from 100 to 200 ℃, the multilayer films demonstrated lower friction coefficients and excellent high-temperature stability. Especially at 100 ℃, the average friction coefficient of the multilayer films was below 0.02, with an average wear rate as low as 0.44×10–7 mm3/(N.m). When the ambient temperature rose to 300 ℃, the MoS2/Ti-WC nanolayered film still maintained a low friction coefficient (~0.08) and an average wear rate (2.33×10–7 mm3/(N.m)) under high-temperature conditions. This was attributed to the structure design of the nanolayered film, high hardness- to-elasticity ratio, excellent antioxidation performance, and structural stability. Additionally, the film components at the sliding interface underwent oxidation phase transformation into MeOx nanoparticles under high temperature and high contact stress. These nanoparticles interacted with MoS2 (002) nanosheets and formed a continuous and dense transfer film on the steel counterpart surface. These research findings have significant implications for the development of novel high-temperature lubricating materials in terms of structure and composition design.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第23391257位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号