杨宏波,王源升,王轩,武强.燃气轮机在海洋环境下的热腐蚀与防护技术研究进展[J].表面技术,2020,49(1):163-172.
YANG Hong-bo,WANG Yuan-sheng,WANG Xuan,WU Qiang.Research Progress of Hot Corrosion and Protection Technology of Gas Turbine under Marine Environment[J].Surface Technology,2020,49(1):163-172
燃气轮机在海洋环境下的热腐蚀与防护技术研究进展
Research Progress of Hot Corrosion and Protection Technology of Gas Turbine under Marine Environment
投稿时间:2019-07-22  修订日期:2020-01-20
DOI:10.16490/j.cnki.issn.1001-3660.2020.01.019
中文关键词:  海洋环境  燃气轮机  热腐蚀  涂层防护  环障涂层
英文关键词:marine environment  gas turbine  hot corrosion  coating protection  environmental barrier coatings
基金项目:
作者单位
杨宏波 海军工程大学 基础部,武汉 430033 
王源升 海军工程大学 基础部,武汉 430033 
王轩 海军工程大学 基础部,武汉 430033 
武强 海军工程大学 基础部,武汉 430033 
AuthorInstitution
YANG Hong-bo Department of Basics, Naval University of Engineering, Wuhan 430033, China 
WANG Yuan-sheng Department of Basics, Naval University of Engineering, Wuhan 430033, China 
WANG Xuan Department of Basics, Naval University of Engineering, Wuhan 430033, China 
WU Qiang Department of Basics, Naval University of Engineering, Wuhan 430033, China 
摘要点击次数:
全文下载次数:
中文摘要:
      针对海洋环境下舰船燃气轮机的热腐蚀现状,从热腐蚀的机理研究着手,基于不同阶段提出的热腐蚀模型理论,分析了高温和低温两种热腐蚀类型的发生过程和表现特征,指出热腐蚀实质上是以Na2SO4为主导的熔盐沉积共晶物与金属基体发生反应而导致金属材料加速氧化的过程。在此基础上,详细介绍了三种涂层防护技术—扩散涂层、覆盖涂层和热障涂层,并根据这三种涂层的发展阶段和功能特性,分析了其在制备工艺、作用机理和应用领域上表现出的差异性,重点强调了热障涂层(TBCs)在当前的发展境况。结合世界各国研究者开展的代表性工作,全面综述了国内外在舰船燃机热腐蚀防护领域的研究进展,重点描述了以硫酸盐为主的腐蚀介质中,金属材料的热腐蚀表现特征,并展示了数值模拟、热力学模拟等方法在热腐蚀研究上的应用案例。最后,对舰船燃气轮机涂层防护技术的发展方向进行了展望,提出发展新一代环障涂层(EBCs)是提高燃气轮机综合防护能力的有效技术手段。
英文摘要:
      In view of the hot corrosion status of gas turbine operating under marine environment, the occurrence process and performance characteristics of two types of hot corrosion at high temperature and low temperature were analyzed based on hot corrosion model theory put forward at different stages from the mechanism research on hot corrosion. It was pointed out that hot corrosion was essentially the process of accelerated oxidation caused by the reaction between the dominant Na2SO4 and the metal substrate. On this basis, three kinds of protective coatings were introduced in detail: diffusion coatings, overlay coatings and thermal barrier coatings (TBCs). According to the development stages and functional characteristics of the three coatings, the differences in preparing technique, mechanism and application field were expounded, while the current development of TBCs was emphasized. Based on the representative work of researchers from all over the world, domestic and foreign research progress on gas turbine hot corrosion resistance were systematically summarized. The hot corrosion behavior of metals in sulfate corrosion medium was mainly described and the application of numerical and thermodynamic simulation method in analyzing hot corrosion was presented. Finally, the developing trend of coating technologies for gas turbine is prospected, and it is also proposed that the new generation of environmental barrier coatings (EBCs) is an effective technological means to improve the comprehensive protective performance of gas turbine.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第24082398位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号