张存鹰,赵波.超声振动辅助加工表面微结构及其特性研究进展[J].表面技术,2019,48(5):259-274.
ZHANG Cun-ying,ZHAO Bo.Research Progress of Properties of Surface Micro-structure in Ultrasonic Vibration Assisted Machining[J].Surface Technology,2019,48(5):259-274
超声振动辅助加工表面微结构及其特性研究进展
Research Progress of Properties of Surface Micro-structure in Ultrasonic Vibration Assisted Machining
投稿时间:2018-09-29  修订日期:2019-05-20
DOI:10.16490/j.cnki.issn.1001-3660.2019.05.038
中文关键词:  超声振动加工  表面微结构  表面形貌  表面粗糙度  表面建模
英文关键词:ultrasonic vibration machining  surface micro-structure  surface topography  surface roughness  surface modeling
基金项目:国家自然科学基金(51475148,U1604255)
作者单位
张存鹰 1.河南理工大学 机械与动力工程学院,河南 焦作 454150;2.河南职业技术学院 机电工程系,郑州 450046 
赵波 1.河南理工大学 机械与动力工程学院,河南 焦作 454150 
AuthorInstitution
ZHANG Cun-ying 1.School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, 454150, China; 2.Department of Mechanical and Electrical Engineering, Henan Polytechnic, Zhengzhou, 450046, China 
ZHAO Bo 1.School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo, 454150, China 
摘要点击次数:
全文下载次数:
中文摘要:
      针对超声振动复合加工方法种类繁多且表面微结构指征复杂等问题,阐述了表面微结构的内容和研究现状,论述了国内外超声切削、磨削、表面强化等方法的加工原理及超声振动加工表面微结构特性的试验研究方法,归纳了超声振动条件下表面粗糙度、表面微观形貌的建模方法及其特点,讨论了实验回归建模、数值解析建模和神经网络建模的研究进展,并预测了国内外超声振动表面加工的新技术领域和发展方向,对改善高性能难加工材料的表面微结构特性具有重要意义。
英文摘要:
      The introduction of ultrasonic vibration into typical material processing can solve the problem that traditional processing is difficult to overcome. In view of the variety of ultrasonic vibration machining methods and the complexity of surface micro-structures, the main contents and research status of surface micro-structures have been described. The machining principle of ultrasonic cutting, ultrasonic grinding and ultrasonic surface strengthening and the experimental research methods of surface micro-structure characteristics in ultrasonic machining have been discussed. The modeling methods and characteristics of surface roughness and surface micro-topography under ultrasonic vibration are summarized. The research progress of experimental modeling, numerical analysis modeling and neural network modeling have been expounded. Finally, the new technology fields and development tendency of ultrasonic vibration surface processing technology at domestic and foreign are predicted, which is of great significance to improve the surface micro-structure characteristics of high-performance and difficult-to-machine materials.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第24118399位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号