杨建新,王中叶.非下采样Contourlet变换在带钢表面缺陷图像去噪中的应用研究[J].表面技术,2018,47(7):259-264.
YANG Jian-xin,WANG Zhong-ye.Application of Nonsubsampled Contourlet Transformation in Steel Strip Image Denoising[J].Surface Technology,2018,47(7):259-264
非下采样Contourlet变换在带钢表面缺陷图像去噪中的应用研究
Application of Nonsubsampled Contourlet Transformation in Steel Strip Image Denoising
投稿时间:2018-01-13  修订日期:2018-07-20
DOI:10.16490/j.cnki.issn.1001-3660.2018.07.039
中文关键词:  非下采样Contourlet变换  图像去噪  最大后验概率  自适应去噪模型  带钢图像
英文关键词:nonsubsampled Contourlet transform  image denoising  maximum posterior probability  adaptive denoising model  steel strip image
基金项目:江苏省高校自然科学研究项目(15KJD520005)
作者单位
杨建新 常州机电职业技术学院 专业基础部,江苏 常州 213164 
王中叶 南京航空航天大学 航空宇航学院,南京 210016 
AuthorInstitution
YANG Jian-xin Professional Basic Department, Changzhou Institute of Mechatronic Technology, Changzhou 213164, China 
WANG Zhong-ye School of Aeronautics and Astronautics, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 对带钢表面图像中的噪声进行有效滤除,以获取较清晰的带钢表面图像,为通过带钢表面图像检测带钢表面缺陷提供良好的源图。方法 利用非下采样 变换具有精细分解的特性,对获取到的带钢表面图像进行尺度分解,获取图像的高、低频系数。在最大后验概率框架的基础上,以噪声图像系数的方差为判断条件,构建了自适应去噪模型,对带钢图像进行前级去噪。为了进一步去除带钢表面图像中的噪声,利用非局部均值方法对前级去噪后的带钢表面图像进行处理,以达到对带钢表面图像中的噪声进行有效滤除。结果 仿真实验结果显示,与对照组方法相比,采用所设计方法去噪后的带钢表面图像不存在阶梯效应等不足,具有更高的峰值信噪比及结构相似度。结论 本文所提方法能有效去除带钢表面图像中夹杂的噪声,可获取较清晰的带钢表面图像。
英文摘要:
      The work aims to effectively filter noise in steel strip image and retain more image details, provide a good source figure for strip image-based surface defect detection. The strip image was decomposed to high and low frequency coefficients of the image as Nonsubsampled Contourlet Transformation (NSCT) had characteristics of fine decomposition. On the basis of maximum posterior probability, a self-adaptive threshold model was established for pre-denoising with variance of noise image coefficient. In order to further remove noise in steel strip image, the pre-denoised steel strip image was processed in the method of non-local means, and noise in the steel strip image was filtered effectively in this way. The simulation results showed that, compared with control group method, the proposed method was free from staircase effect and other shortcomings, and generated higher peak signal-to-noise ratio and structural similarity. The proposed method can effectively remove noise in the steel strip image, and can retain more image details, so that the denoised image has better visual effect.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第24194476位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号