黄河,杨帆,高玉魁.喷丸除锈过程及效果的数值模拟研究[J].表面技术,2016,45(11):194-201.
HUANG He,YANG Fan,GAO Yu-kui.Numerical Simulations on Process and Effectiveness of Rust Removal by Shot Blasting[J].Surface Technology,2016,45(11):194-201
喷丸除锈过程及效果的数值模拟研究
Numerical Simulations on Process and Effectiveness of Rust Removal by Shot Blasting
投稿时间:2016-05-14  修订日期:2016-11-20
DOI:10.16490/j.cnki.issn.1001-3660.2016.11.030
中文关键词:  喷丸  除锈  有限元模拟  单元去除  残余应力场
英文关键词:shot blasting  rust removal  finite element  element removal  residual stress
基金项目:上海市教委科研创新项目(15zz018);中央高校基本科研业务费专项资金(20143401)
作者单位
黄河 同济大学 航空航天与力学学院,上海 200092 
杨帆 同济大学 航空航天与力学学院,上海 200092 
高玉魁 同济大学 航空航天与力学学院,上海 200092 
AuthorInstitution
HUANG He School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China 
YANG Fan School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China 
GAO Yu-kui School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 模拟研究喷丸除锈工艺的过程和处理效果,为优化工艺参数提供指引。 方法 以建筑用低碳钢及其锈蚀产物为研究对象,利用单元去除技术和周期性胞元方法建立有限元模型,模拟多个丸粒随机撞击和氧化层去除的过程,并与文献中的实验数据进行了对比验证,从氧化层去除速率、去除后的表面粗糙度和表层残余应力三个角度分析喷丸除锈工艺的效果。 结果 提高除锈效果可从增大丸粒入射速度和丸粒直径来入手,氧化层越厚喷丸除锈处理的时间越长。 结论 喷丸除锈工艺能有效去除锈蚀层,同时改善表面粗糙度和引入残余压应力,具有较广的应用前景。有限元模拟能为该工艺优化提供便捷的研究途径。
英文摘要:
      The work aims to investigate into the process and effectiveness of rust removal technique by shot blasting based on numerical simulations so as to direct the optimization of technological parameters. While low-carbon steel for building and its corrosion products were taken as the object of study, finite element (FE) models were established by utilizing the element removal technique and periodic cell algorithm, so as to simulate the rust removal process for the mild steel under the random impact of various shots. The simulations were validated by comparing the results with the experimental data in literatures. The effectiveness of the shot blasting in rust removal was examined in terms of rust removing rate, residual stress distribution and surface roughness. The effectiveness of shot blasting treatment was improved by increasing kinetic energy of the impinging shots, i.e. the incident velocity and shot diameter. Longer shot blasting treatment was required to remove the rust for thicker oxide layer. Shot blasting is an efficient technique to remove the rust coating, improve the surface roughness and introduce the compressive residual stress. Hence it has promising application prospect. FE simulation is a useful tool to provide flexible study approach for optimizing the process.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第23706860位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号