郭士锐,郭小锋,易云杰,姚建华,曹衍龙.钛合金表面半导体激光气体氮化涂层的性能研究[J].表面技术,2016,45(9):201-206. GUO Shi-rui,GUO Xiao-feng,YI Yun-jie,YAO Jian-hua,CAO Yan-long.Properties of Diode Laser Gas Nitriding Coatings on the Surface of Tita-nium Alloy[J].Surface Technology,2016,45(9):201-206 |
钛合金表面半导体激光气体氮化涂层的性能研究 |
Properties of Diode Laser Gas Nitriding Coatings on the Surface of Tita-nium Alloy |
投稿时间:2016-01-17 修订日期:2016-09-20 |
DOI:10.16490/j.cnki.issn.1001-3660.2016.09.030 |
中文关键词: 钛合金 激光气体氮化 半导体激光器 耐磨性性能 抗汽蚀性能 表面改性 |
英文关键词:titanium alloy laser gas nitriding diode laser wear-resistant property anti-cavitation property surface modification |
基金项目:郑州市科技计划项目( 20150483);河南省高等学校重点科研项目( 15A460038);中国纺织工业联合会科技指导性项目计划( 2016085) |
|
Author | Institution |
GUO Shi-rui | School of Mechanical & Electronic Engineering, Zhongyuan University of Technology, Zhengzhou 450007, China |
GUO Xiao-feng | School of Mechanical & Electronic Engineering, Zhongyuan University of Technology, Zhengzhou 450007, China |
YI Yun-jie | Bray (China) Controls Co., Ltd, Hangzhou 311231, China |
YAO Jian-hua | 1.Institute of Laser Advanced Manufacturing, Zhejiang University of Technology, Hangzhou 310014, China; 2.Zhejiang Provincial Collaborative Innovation Center of High-end Laser Manufacturing Equipment, Hangzhou 310014, China |
CAO Yan-long | 1.School of Mechanical & Electronic Engineering, Zhongyuan University of Technology, Zhengzhou 450007, China; 2.China Institute of Modern Manufacturing Engineering, Zhejiang University, Hangzhou 310027, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 提升钛合金(TC4)叶片表面性能,解决失效问题。方法 实验采用激光局部气体氮化工艺代替传统氮化工艺,利用2 kW柔性光纤耦合半导体激光器在钛合金(TC4)基体表面采用气体氮化的方法制备TiN表面改性层。采用摩擦磨损试验机和改制的汽蚀装置分别测试了氮化层与基体(TC4)的耐磨性与抗汽蚀性能。结果 摩擦磨损实验后,激光氮化层的质量损失为2.3 mg,基体TC4的质量损失为20.2 mg,激光氮化层的损失质量为基体TC4的11.3%,激光氮化层抗磨损性能相较基体TC4提高了7倍。TC4基体汽蚀损失的质量为4.08 mg,而氮化层的质量损失为1.13 mg,氮化层的抗汽蚀性能比基体提高了2.61倍。结论 采用半导体激光气体氮化钛合金叶片能够得到分布着大量TiN枝晶的氮化层,提高表面耐磨损性能,氮化层中的TiN枝晶构成的网篮状组织对其表面抗汽蚀性能也有所提高。 |
英文摘要: |
Objective In order to enhance the surface properties of titanium alloy (TC4) blade and solve the failure problem. Methods With laser gas nitriding technology instead of traditional nitriding technology, TiN surface modification layer was prepared on the surface of titanium alloy (TC4) with a 2 kW flexible fiber coupled diode laser. The wear-resistant property and anti-cavitation property of the nitriding layer and the substrate (TC4) were examined by the friction-abrasion testing machine and modified experimental device for cavitation erosion. Results The results showed that the wear loss weight of TC4 substrate was 20.2 mg while that of nitriding layer was 2.3 mg, which was only 11.3% of TC4 substrate. The wear resistance increased by 7 times compared with that of the TC4 substrate. The cavitation erosion loss weight of TC4 substrate was 4.08 mg while that of nitriding layer was 1.13 mg. The anti-cavitation property increased by 2.61 times compared with that of the TC4 substrate. Conclusion A large number of TiN dendrites in the nitride layer can be obtained with diode laser by laser gas nitriding titanium alloy blade, which improves wear-resistant property of the surface. The distribution of the basket shaped structure of TiN dendritic crystal improves the anti-cavitation property of the surface. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|