张明,潘永强,陈佳,栗旭阳,杨飞.光谱选择反射型太阳隔热膜研究[J].表面技术,2015,44(4):79-83. ZHANG Ming,PAN Yong-qiang,CHEN Jia,LI Xu-yang,YANG Fei.Design and Fabrication of Spectral Selective Reflection Type Solar Heat Insulation Film[J].Surface Technology,2015,44(4):79-83 |
光谱选择反射型太阳隔热膜研究 |
Design and Fabrication of Spectral Selective Reflection Type Solar Heat Insulation Film |
投稿时间:2015-01-30 修订日期:2015-04-20 |
DOI:10.16490/j.cnki.issn.1001-3660.2015.04.014 |
中文关键词: 太阳隔热膜 透射率 反射率 光学常数 热蒸发 隔热率 |
英文关键词:solar heat insulation film transmittance reflectance optical constant thermal evaporation heat insulation |
基金项目:国家级大学生创新创业训练计划项目(201410702001);陕西省自然科学基础研究计划项目(2014JM8333) |
|
Author | Institution |
ZHANG Ming | School of Photoelectric Engineering, Xi'an Technological University, Xi'an 710032, China |
PAN Yong-qiang | School of Photoelectric Engineering, Xi'an Technological University, Xi'an 710032, China |
CHEN Jia | School of Photoelectric Engineering, Xi'an Technological University, Xi'an 710032, China |
LI Xu-yang | School of Photoelectric Engineering, Xi'an Technological University, Xi'an 710032, China |
YANG Fei | School of Photoelectric Engineering, Xi'an Technological University, Xi'an 710032, China |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
目的 研制具备高紫外光阻隔率、高红外光阻隔率、高可见光透射率的太阳隔热膜。 方法 依据标准大气光谱和隔热膜的基本原理给出理想隔热膜的透射率光谱曲线,在防止室内眩光的基础上给出太阳隔热膜的实用透射率曲线。 通过对金属 Ag 薄膜光学常数的研究,提出基于介质 ZnS 和金属 Ag 的多层结构的选择反射型太阳隔热膜结构,利用 TFC 膜系软件设计三层结构的选择反射型太阳隔热膜并进行允差分析。 采用热蒸发技术制备该选择反射型膜太阳隔热膜。 结果 隔热膜在 0. 3 ~0. 38 μm 紫外波段的阻隔率达到 99. 2% ,在 0. 38 ~0. 78 μm 可见光波段的平均透射率为 75. 2% ,在 0. 78 ~ 2. 5 μm 红外波段的阻隔率达到 91. 2% ,太阳能总隔热率为 62. 1% 。 结论 研制的太阳隔热膜能在保证隔离紫外线辐射和红外热辐射的同时满足对可见光具有较高的透射率。 |
英文摘要: |
Objective To develop a solar heat insulation film with high UV blocking rate, high infrared blocking rate and high visible light transmittance. Methods The ideal transmittance spectral curve of solar heat insulation film was given according to the principle of heat insulation and the standard atmosphere spectrum. The practical transmittance spectral curve of solar heat insulation film was also given to prevent the glare. The optical constant of metal Ag thin film was studied, and the spectral selective reflection solar heat insulation film with multilayer structure based on the medium zinc sulfide (ZnS) and metal Ag was presented. Three-layer solar heat insulation film was designed using TFC software, and tolerance analysis was performed. The solar heat insulation film was deposited by thermal evaporation technique. Results The spectral test results showed that the UV blocking rate of the heat insulation film reached 99. 2% in the range of 0. 3 ~0. 38 μm, the average transmittance was more than 75. 2% in the visible wave-length range of 0. 38 ~0. 78 μm and the infrared blocking rate was 91. 2% in the range of 0. 78 ~2. 5 μm. The total solar heat insulation rate was 62. 1% . Conclusion The heat insulation film developed could isolate UV radiation and infrared radiation, and meanwhile had high transmittance in the visible waveband. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|