高霁,冯俊文,宋德阳.激光熔覆 CBN 膜层的形态特征及性能研究[J].表面技术,2014,43(4):27-31.
GAO Ji,FENG Jun-wen,SONG De-yang.Morphological Characteristics and Property of Laser Clad CBN Coating[J].Surface Technology,2014,43(4):27-31 |
| 激光熔覆 CBN 膜层的形态特征及性能研究 |
| Morphological Characteristics and Property of Laser Clad CBN Coating |
| 投稿时间：2014-03-02 修订日期：2014-04-16 |
| DOI： |
| 中文关键词: 钛合金 激光熔覆 CBN 膜层 硬度 摩擦磨损性能 |
| 英文关键词:titanium alloy laser cladding CBN coating hardness friction and wear performance |
| 基金项目:辽宁省自然科学基金资助项目(201202172) |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 提高钛合金的表面硬度和耐磨性能。 方法 采用激光熔覆工艺,在 TC11 钛合金表面制备 80% CBN+20% Ti( 均为质量分数) 熔覆层,分析熔覆层的显微组织、硬度和耐磨性能。 结果 熔覆层的显微组织沿层深方向分为熔覆区、结合区和过渡区三个区域,区域之间没有明显的裂纹和断层。 CBN膜层的显微硬度最高达到 950 HV0 . 2 ,耐磨性比纯 Ti 熔覆层提高了近 14 倍。 结论 在钛合金表面激光熔覆 CBN 抗磨涂层,不仅耐磨损性能良好,而且表面硬度得到了有效提高。 |
| 英文摘要: |
| Objective To improve the surface hardness and wear resistance of titanium alloy. Methods An experimental research of 80% CBN+20% Ti coating was prepared on TC11 alloy surface using laser cladding technology. The microstructure, hardness and wear resistance of the clad coating were analyzed. Results Microstructure analyses showed that the clad coating could be divided into three zones along the depth direction: clad, binding and transition zones, and there were no obvious cracks and faults among the zones. The maximal microhardness of the CBN membrane layer reached 950HV0. 2, and the wear resistance performance of CBN anti-wear coating was nearly 14 times as high as that of pure Ti coating. Conclusion The wear resistance performance of CBN laser clad anti-wear coating on titanium alloy surface was good, and the surface hardness of the titanium alloy was effectively improved. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号