曹宏涛,李雪亭.基于海洋环境的紧固件腐蚀防护要求及技术措施[J].表面技术,2013,42(1):105-108.
CAO Hong-tao,LI Xue-ting.Corrosion Protection Requirements and Technical Measures of Fasteners Based on the Marine Environment[J].Surface Technology,2013,42(1):105-108
基于海洋环境的紧固件腐蚀防护要求及技术措施
Corrosion Protection Requirements and Technical Measures of Fasteners Based on the Marine Environment
投稿时间:2012-08-20  修订日期:2012-09-10
DOI:
中文关键词:  紧固件  腐蚀防护  表面处理
英文关键词:fasteners  corrosion protection  surface treatment
基金项目:
作者单位
曹宏涛 海装驻沈阳地区舰船配套军代室, 沈阳 110168 
李雪亭 92330 部队装备部, 青岛 266100 
AuthorInstitution
CAO Hong-tao Naval Equipment Department Warships Supporting Military Representative Office in Shenyang Area,Shenyang 110168 , China 
LI Xue-ting 92330 Army Equipment Department, Qingdao 266100 , China 
摘要点击次数:
全文下载次数:
中文摘要:
      紧固件是实现机械连接大量采用的一种最常见方式,是机械工业中的关键基础零部件。 紧固件在各种环境中的腐蚀一直是设计者面临的问题。 解决紧固件腐蚀的方法很多,表面处理是其中的重要方法之一。简要分析了紧固件腐蚀防护的基本措施和思路,着重从表面处理技术和结构防腐出发,讨论了紧固件表面涂层在不同工况下的使用要求,提出了表面处理方法和防腐结构设计。
英文摘要:
      The fastener which is extensively used in mechanical connection as one of the most common methods,is the infrastructure component in the machinery industry. However,the corrosion of fasteners in a variety of environments has always been a big problem that designers have to face. There are many methods of solving fastener corrosion, among which the surface treatment is one of the important methods. The basic corrosion protection measures and ideas for fastener were briefly analyzed. Focused on the surface treatment technology and structural anti-corrosive, the requirements of surface coatings in different operation conditions were discussed. In addition, surface treatment methods and corrosion structural design for fasteners were proposed.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第23360929位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号