王玉琴,路品,马彦飞.金属表面黑色磷化液的研究[J].表面技术,2012,(4):71-73.
WANG Yu-qin,LU Pin,MA Yan-fei.Study on Blacken Phosphating Solution for Metal Surfaces[J].Surface Technology,2012,(4):71-73 |
| 金属表面黑色磷化液的研究 |
| Study on Blacken Phosphating Solution for Metal Surfaces |
| 投稿时间：2012-03-27 修订日期：2012-08-20 |
| DOI： |
| 中文关键词: 黑色磷化 钢铁 黑化液 |
| 英文关键词:black phosphating steel blacken phosphating solution |
| 基金项目: |
| 作者 | 单位 |
| 王玉琴 | 廊坊广播电视大学,廊坊065000 |
| 路品 | 河北大学,保定071002 |
| 马彦飞 | 廊坊师范学院,廊坊065000 |
|
| Author | Institution |
| WANG Yu-qin | Langfang Radio and TV University, Langfang 065000, China |
| LU Pin | Hebei University, Baoding 071002, China |
| MA Yan-fei | Langfang Normal College, Langfang 065000, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 选用马日夫盐、三氯化锑、酒石酸钠、磷酸、钼酸钠及自制的聚合物-A 和聚合物-B为黑化液的主要成分,通过正交试验优化出了最佳配比,即:马日夫盐8.0g/L,三氯化锑6.0g/L,酒石酸钠6.0g/L,磷酸50g/L,钼酸钠1.0g/L,聚合物-A1.0g/L,聚合物-B1.5g/L。测试结果表明,采用该黑化液得到的黑化膜致密、均匀,抗蚀性好。 |
| 英文摘要: |
| This study choiced the manganese dihydrogen phosphate, antimony trichloride, tartaric acid, phosphoric acid, sodium molybdate, polymer-A and polymer-B as the main raw materials in the the system of blacken phosphating solution for metal surface. By orthogonal testes the optimum process conditions were optimized out namely: manganese dihydrogen phosphate was 8.0 g/L, antimony trichloride was 6.0 g/L, tartrate was 6.0 g/L, phosphoric acid was 50 g/L, sodium molybdate was 1.0 g/L, polymer-A was 1.0 g/L, polymer-B was 1.5 g/L. Test results show that the blacken phosphated film is tight uniform, and has good adhesion. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号