丛树林,时海芳,姜昕彤,李海玉,孙上茹,刘波.磨削淬火强化层与高频感应淬火强化层的对比研究[J].表面技术,2012,(3):71-72，96.
CONG Shu-lin,SHI Hai-fang,JIANG Xin-tong,LI Hai-yu,SUN Shang-ru,LIU Bo.Study on Comparision of Grinding Hardened Layer with Induction Hardened Layer[J].Surface Technology,2012,(3):71-72，96 |
| 磨削淬火强化层与高频感应淬火强化层的对比研究 |
| Study on Comparision of Grinding Hardened Layer with Induction Hardened Layer |
| 投稿时间：2012-01-13 修订日期：2012-06-20 |
| DOI： |
| 中文关键词: 磨削淬火 高频感应淬火 组织 厚度 硬度 |
| 英文关键词:grinding hardening induction hardening microstructure thickness hardness |
| 基金项目: |
| 作者 | 单位 |
| 丛树林 | 辽宁科技学院,本溪117004 |
| 时海芳 | 辽宁工程技术大学材料科学与工程学院,阜新123000 |
| 姜昕彤 | 辽宁工程技术大学建筑工程学院,阜新123000 |
| 李海玉 | 辽宁工程技术大学材料科学与工程学院,阜新123000 |
| 孙上茹 | 辽宁工程技术大学机械工程学院,阜新123000 |
| 刘波 | 辽宁工程技术大学材料科学与工程学院,阜新123000 |
|
| Author | Institution |
| CONG Shu-lin | Liaoning Institute of Science and Technology, Benxi 117004, China |
| SHI Hai-fang | College of Materials Science and Engineering, Liaoning Technical University, Fuxin123000, China |
| JIANG Xin-tong | College of Architecture and Engineering, Liaoning Technical University, Fuxin 123000,China |
| LI Hai-yu | College of Materials Science and Engineering, Liaoning Technical University, Fuxin123000, China |
| SUN Shang-ru | College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China |
| LIU Bo | College of Materials Science and Engineering, Liaoning Technical University, Fuxin123000, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 对42CrMo钢进行磨削淬火和高频感应淬火,对比研究了两种强化层的显微组织、硬度和厚度。结果表明:高频感应淬火强化层的厚度、组织及截面显微硬度分布都较为均匀,组织为细针状的马氏体组织;磨削淬火强化层的厚度不均匀,组织以板条状马氏体为主,由表及里呈现“细曻略粗曻细暠的变化规律,显微硬度高于高频感应淬火强化层。 |
| 英文摘要: |
| The 42CrMo was treated by grinding hardening and making induction hardening test and the micro-structure, hardness and thickness of the two strengthened layers were compared and studied. The results show that the thickness of enhanced induction strengthened layer is uniformity, the structure of strengthened layer and microhardness of it's cross section are homogeneous, the martensite organization is fine needle-like; And the thickness of grind-hardening strengthened layer is uneven, the main martensite organization of strengthened layer is lath-like, and the change rule of the organization is from fine to slightly coarse, then to fine. The change of microhardness is obvious in strengthened layer. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号