杨富国,廖丽萍,邓应财,阮善菊.不锈钢化学镀镍工艺研究[J].表面技术,2010,39(6):84-86.
YANG Fu-guo,LIAO Li-ping,DENG Ying-cai,YUAN Shan-ju.Study on Electroless Nickel Plating Process on Stainless Steel[J].Surface Technology,2010,39(6):84-86
不锈钢化学镀镍工艺研究
Study on Electroless Nickel Plating Process on Stainless Steel
投稿时间:2010-07-26  修订日期:2010-12-10
DOI:
中文关键词:  不锈钢  化学镀  镀镍  工艺
英文关键词:stainless steel  electroless plating  nickel plating  process
基金项目:
作者单位
杨富国 佛山科学技术学院,佛山528000 
廖丽萍 佛山科学技术学院,佛山528000 
邓应财 佛山科学技术学院,佛山528000 
阮善菊 马鞍山市环境科学研究所,马鞍山243000 
AuthorInstitution
YANG Fu-guo Foshan University, Foshan 528000, China 
LIAO Li-ping Foshan University, Foshan 528000, China 
DENG Ying-cai Foshan University, Foshan 528000, China 
YUAN Shan-ju Maanshan Research Institute of Environmental Engineering, Maanshan 243000, China 
摘要点击次数:
全文下载次数:
中文摘要:
      采用主要含硫酸镍、次磷酸钠、表面活性剂、醋酸钠及柠檬酸钠的镀液对不锈钢试片进行化学镀镍,研究了硫酸镍和表面活性剂的浓度、镀液pH值及温度对沉积速度的影响,确定了这几项参数的较佳取值。结果表明:硫酸镍25 g/ L、表面活性剂0.1 g/ L、温度85℃、pH值4.6较为适宜,在该工艺条件下所得的镀层样品经弯曲、热浸和人工汗实验均合格。
英文摘要:
      A electroless nickel plating on stainless steel was made by plating solution which contains nickel sulfate, sodium hypophosphite, surfactant, sodium acetate, sodium citrate. The Influences of concentration of NiSO4· 6H2O, pH value, temperature and addition of surfactants on deposition rate were studied. The results show that the optimum operating condition is concentration of NiSO4·6H2O 25 g/ L, temperature of solution being 85℃,pHvalue being 4. 6 and addition of surfactants being 0.1 g/ L. Bend test, heat immersion test and artificial sweat test were done for sample.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第24163403位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号