陈永福,闫清立,钟军,王琴.聚苯胺含量对镁合金上聚苯胺环氧涂层防腐性能的影响[J].表面技术,2010,39(6):42-43,100.
CHEN Yong-fu,YAN Qing-li,ZHONG Jun,WANG Qin.The Effect of Mass Rate of Polyaniline on Corrosion Resistance of Polyaniline/Epoxy Coating on AZ31B Magnesium Alloy[J].Surface Technology,2010,39(6):42-43,100
聚苯胺含量对镁合金上聚苯胺环氧涂层防腐性能的影响
The Effect of Mass Rate of Polyaniline on Corrosion Resistance of Polyaniline/Epoxy Coating on AZ31B Magnesium Alloy
投稿时间:2010-08-21  修订日期:2010-12-10
DOI:
中文关键词:  聚苯胺  防腐  环氧涂料  防腐性能  镁合金
英文关键词:polyaniline  corrosion resistance  epoxy coating  corrosion resistance  magnesium alloy
基金项目:
作者单位
陈永福 1.中国兵器工业第五九研究所,重庆400039;2.重庆市环境腐蚀与防护工程技术研究中心,重庆400039 
闫清立 河南北方红阳工业集团有限公司,南阳474678 
钟军 1.中国兵器工业第五九研究所,重庆400039;2.重庆市环境腐蚀与防护工程技术研究中心,重庆400039 
王琴 1.中国兵器工业第五九研究所,重庆400039;2.重庆市环境腐蚀与防护工程技术研究中心,重庆400039 
AuthorInstitution
CHEN Yong-fu 1.NO.59 Institute of China Ordnance Industry, Chongqing 400039, China;2.Chongqing Engineering Research Center for Environmental Corrosion and Protection, Chongqing 400039, China 
YAN Qing-li Henan North Hongyang Industries Geoup Co LTD, Nanyang 474678, China 
ZHONG Jun 1.NO.59 Institute of China Ordnance Industry, Chongqing 400039, China;2.Chongqing Engineering Research Center for Environmental Corrosion and Protection, Chongqing 400039, China 
WANG Qin 1.NO.59 Institute of China Ordnance Industry, Chongqing 400039, China;2.Chongqing Engineering Research Center for Environmental Corrosion and Protection, Chongqing 400039, China 
摘要点击次数:
全文下载次数:
中文摘要:
      在AZ31B镁合金表面制备了含本征态聚苯胺0%,1%,2%,4%,6%的聚苯胺/环氧防腐涂层,通过Tafel极化曲线、电化学阻抗谱测试及中性盐雾实验对比了其在3.5%NaCl溶液中的防腐性能。结果表明:聚苯胺的含量对聚苯胺环氧涂层的防腐性能有较大影响,聚苯胺的质量分数为2%时,涂层具有最佳的防腐性能。
英文摘要:
      The polyaniline/epoxy anticorrosive coatings on AZ31B magnesium alloy that the mass rate of eigenstate polyaniline in coating was 0%,1%,2%,4%and 6% were prepared, and theirs corrosion resistance in 3.5% NaCl solution was studied by Tafel,EIS and salt spray test. Resultsindicate that the mass rate has significantinfluence on the corrosion resistance of the polyaniline/epoxy coating, the corrosion resistance of the coating is best when the mass rate of polyaniline in coating is 2%.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第24163214位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号