邵菲,陈文革.有色金属制精密零件的化学去毛刺技术研究[J].表面技术,2010,39(4):106-109.
SHAO Fei,CHEN Wen-ge.The Chemical Deburring-technology Research of Precise Parts of Non-ferrous Metal[J].Surface Technology,2010,39(4):106-109 |
| 有色金属制精密零件的化学去毛刺技术研究 |
| The Chemical Deburring-technology Research of Precise Parts of Non-ferrous Metal |
| 修订日期：2010-08-10 |
| DOI： |
| 中文关键词: 有色金属 精密零件 去毛刺 化学法 |
| 英文关键词:non-ferrous metal precise parts deburring chemical method |
| 基金项目: |
|
|
|
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 提出了一种化学去毛刺技术,去毛刺液的组成(质量分数)为70%磷酸+ 12%草酸+ 18%水,去毛刺时控制溶液温度在45～ 60℃、时间为10～ 45 min即可。运用体视显微镜、扫描电子显微镜、X-ray衍射仪和维氏硬度计等手段考察了此化学去毛刺技术处理有色金属制精密零件的效果,认为此化学去毛刺技术可以达到精度要求、技术要求和质量要求,不改变零件的性能,且具有一定的光亮作用。 |
| 英文摘要: |
| A chemical deburring technology has been proposed. The prescription of the chemical deburring fluid for precise parts of non-ferrous metal is the phosphoric acid, the oxalic acid and the water which is according to the respectively quality presentation 70%,12% and 18%; The deburring fluid temperature to the precise parts of the non-fer-rous metal is maintained between 45℃ and 60℃ .And the time is between 10 min and 45 min. The result of the precise parts of non-ferrous metal with carry-over burrs that have been treated by chemical deburring have been systematically researched by means of stereomicroscope, scanning electron microscopy, X-ray diffractometer and vickers hardness and so on. Proved that each kind of accuracy requirements, technology requirements and quality requirements for precise parts can be achieved, it doesn't have change to the parts performance and has certain luminous function. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号