张琦,叶菲,肖巍,闵捷,孟令娟,叶卫平,程旭东.水润滑条件下Cr2O3陶瓷涂层的耐蚀与抗污性能研究[J].表面技术,2010,39(3):40-43.
ZHANG Qi,YE Fei,XIAO Wei,MIN Jie,MENG Ling-juan,YE Wei-ping,CHENG Xu-dong.Study on Corrosion Resistance and Anti-adhesion of Microorganism Properties of Ceramic Coating under Water-lubrication[J].Surface Technology,2010,39(3):40-43
水润滑条件下Cr2O3陶瓷涂层的耐蚀与抗污性能研究
Study on Corrosion Resistance and Anti-adhesion of Microorganism Properties of Ceramic Coating under Water-lubrication
投稿时间:2009-12-11  修订日期:2010-06-10
DOI:
中文关键词:  陶瓷涂层  孔隙率  耐腐蚀  抗生物附着
英文关键词:ceramic coating  porosity  corrosion resistance  anti-adhesion of the microorganism
基金项目:
作者单位
张琦 1.武汉理工大学,武汉430070; 2.材料复合新技术国家重点实验室,武汉430070 
叶菲 1.武汉理工大学,武汉430070; 2.材料复合新技术国家重点实验室,武汉430070 
肖巍 1.武汉理工大学,武汉430070; 2.材料复合新技术国家重点实验室,武汉430070 
闵捷 1.武汉理工大学,武汉430070; 2.材料复合新技术国家重点实验室,武汉430070 
孟令娟 1.武汉理工大学,武汉430070; 2.材料复合新技术国家重点实验室,武汉430070 
叶卫平 1.武汉理工大学,武汉430070; 2.材料复合新技术国家重点实验室,武汉430070 
程旭东 1.武汉理工大学,武汉430070; 2.材料复合新技术国家重点实验室,武汉430070 
AuthorInstitution
ZHANG Qi 1.Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Advanced Technology for Materials Synthesis and Progressing, Wuhan 430070, China 
YE Fei 1.Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Advanced Technology for Materials Synthesis and Progressing, Wuhan 430070, China 
XIAO Wei 1.Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Advanced Technology for Materials Synthesis and Progressing, Wuhan 430070, China 
MIN Jie 1.Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Advanced Technology for Materials Synthesis and Progressing, Wuhan 430070, China 
MENG Ling-juan 1.Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Advanced Technology for Materials Synthesis and Progressing, Wuhan 430070, China 
YE Wei-ping 1.Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Advanced Technology for Materials Synthesis and Progressing, Wuhan 430070, China 
CHENG Xu-dong 1.Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Advanced Technology for Materials Synthesis and Progressing, Wuhan 430070, China 
摘要点击次数:
全文下载次数:
中文摘要:
      采用等离子喷涂工艺制备了2种Cr2O3陶瓷涂层(P7412和P7418,P7412粉末为市售,P7418粉末为自制),对2种涂层的组织结构、耐腐蚀性能进行了对比分析,并探讨了P7418涂层的抗生物附着机理。结果表明:2种涂层中各组分分布均匀,P7418涂层的孔隙率比P7412涂层略低;CuO的加入使得P7418涂层在10%HCl,10%NaOH和10%NaCl 3种腐蚀液中的耐腐蚀性能均比P7412涂层略差,但可以起到防止生物附着污染的效果。
英文摘要:
      Comparative analysis between P7412 and P7418 ceramic coatings(P7412 powder is purchased from market,P7418 powder is self-made)prepared by plasma spray were performed in microstructure and corrosion resistance properties. The mechanism of anti-adhesion of the microorganism for P7418 coatings was discussed. The result reveals that, the porosity of ceramic coating P7418 is slightly less than that of P7412 while both have uniform phase distribution. The P7418 coating has slightly worse corrosion resistance than P7412 in 10%HCl, 10%NaOH and 10%NaCl solutions, but the anti-adhesion of the microorganism is improved by the addition of CuO.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第23706583位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号