许洲,王海庆,丁毅,马立群,吴宪治.A231镁合金表面阳极氧化工艺研究[J].表面技术,2008,37(3):46-48.
XU Zhou,WANG Hai-qing,DING Yi,MA Li-qun,WU Xian_zhi.Study on Anodizing Process for A231 Magnesium Alloy[J].Surface Technology,2008,37(3):46-48
A231镁合金表面阳极氧化工艺研究
Study on Anodizing Process for A231 Magnesium Alloy
投稿时间:2008-03-11  修订日期:2008-06-10
DOI:
中文关键词:  A231镁合金  阳极氧化  正交设计  耐蚀性
英文关键词:A231 magnesium alloy  Anodizing  Orthogonal design  Corrosion resistance
基金项目:
作者单位
许洲 南京工业大学,江苏南京210009 
王海庆 南京工业大学,江苏南京210009 
丁毅 南京工业大学,江苏南京210009 
马立群 南京工业大学,江苏南京210009 
吴宪治 名硕电脑苏州有限公司,江苏苏州215011 
AuthorInstitution
XU Zhou Nangjing University of Techenology, Nanjing 210009, China 
WANG Hai-qing Nangjing University of Techenology, Nanjing 210009, China 
DING Yi Nangjing University of Techenology, Nanjing 210009, China 
MA Li-qun Nangjing University of Techenology, Nanjing 210009, China 
WU Xian_zhi Suzhou Pegatron Corp. , Suzhou 215011, China 
摘要点击次数:
全文下载次数:
中文摘要:
      采用正交设计方法,研究了A231镁合金表面阳极氧化工艺配方。采用扫描电镜(SEM)、能谱分析仪(EDS)、X射线衍射法( XRD)、动电位极化曲线测量方法评价了优化工艺配方条件下阳极氧化膜的微观成分结构及其耐蚀性能。结果表明:经优化配方阳极氧化处理可以显著改善A231镁合金的耐腐蚀性能,且经沸水封孔处理可以有效地封闭氧化膜中的裂纹,进一步提高膜层的耐腐蚀性能。
英文摘要:
      Orthogonal design was employed in tests to prepare anodizing films on A231 magnesium alloy. The morphology, structure, element composition and corrosion resistance of anodizing films obtained through optimized techniques were studied by SEM, EDS, XRD and electrokinetic polarization curve researches. Results shows that the anodizing films in optimized techniques have well corrosion resistance. After sealing by boiling water, the cracks on the surface of anodizing films are reduced and its corrosion resistance improves obviously.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第23608480位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号