张玉叶,吴文贤,李强,陈进武,吴敏生.等离子喷涂纳米结构AT13基涂层工艺图的建立[J].表面技术,2008,37(2):64-66,80.
ZHANG Yu-ye,WU Wen-xian,LI Qiang,CHEN Jin-wu,WU Min-sheng.Development of Process Maps for Plasma Sprayed Nanostructured AT13-based Ceramic Coatings[J].Surface Technology,2008,37(2):64-66,80 |
| 等离子喷涂纳米结构AT13基涂层工艺图的建立 |
| Development of Process Maps for Plasma Sprayed Nanostructured AT13-based Ceramic Coatings |
| 投稿时间：2007-11-22 修订日期：2008-04-10 |
| DOI： |
| 中文关键词: 等离子喷涂 纳米结构AT13 陶瓷涂层 工艺图 |
| 英文关键词:Plasma spraying Nanostructured AT13 Ceramic coatings Process map |
| 基金项目:福建省科技厅科技计划重点项目（2005H031，2003H024） |
|
|
| Author | Institution |
| ZHANG Yu-ye | College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China |
| WU Wen-xian | College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China |
| LI Qiang | College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China |
| CHEN Jin-wu | College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China |
| WU Min-sheng | College of Materials Science and Engineering, Fuzhou University, Fuzhou 350108, China |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 利用定量金相分析、显微硬度测试、压痕断裂试验、结合强度测试和摩擦磨损试验，通过正交设计试验对等离子喷涂纳米结构Al203 -130-/0 Ti0，( AT13)基陶瓷涂层的工艺进行了优化。分析了工艺参数、微观结构、力学性能之间的关系，提出了喷涂工艺图的建立方法，建立了相应的三维关系图。通过该工艺图可确定各个性能最优的工艺参数范围。 |
| 英文摘要: |
| By means of quantitative image analysis, microhardness test, indentation fracture test, adhesion strength test and wear resistance test , the process parameters of plasma sprayed nanostructured Al203-13 0-10 Ti02 ( AT13 ) - based ceramic coatings were optimized by orthogonal design experiments. The relationships of process parameters, microstructure and mechanical properties were analyzed and further more, a method for establishment of process maps was presented, and the corresponding three-dimensional maps were established. And the range of the optimal process parameters can be easily predicted by these process maps. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501715号