王瑞麟,赖长洪,何孟泽,何金枚,刘岚兰,王松,刘伟强.医用导管抗菌涂层的研究进展[J].表面技术,2024,53(16):51-67.
WANG Ruilin,LAI Changhong,HE Mengze,HE Jinmei,LIU Lanlan,WANG Song,LIU Weiqiang.Research Progress of Antibacterial Coating for Medical Catheter[J].Surface Technology,2024,53(16):51-67
医用导管抗菌涂层的研究进展
Research Progress of Antibacterial Coating for Medical Catheter
投稿时间:2023-10-12  修订日期:2024-01-28
DOI:10.16490/j.cnki.issn.1001-3660.2024.16.004
中文关键词:  导管相关性感染  医用导管  表面改性  抗菌策略  多机制抗菌  生物膜
英文关键词:catheter-related infection  medical catheter  surface modification  antibacterial strategy  multi-mechanism antibacterial  biofilm
基金项目:广东省基础与应用基础研究基金(2020B1515120082);深圳市发展和改革委员会专项基金(XMHT20230115003)
作者单位
王瑞麟 深圳清华大学研究院 生物医用材料及植入器械实验室,广东 深圳 518057;清华大学 机械工程系,北京 100084;清华大学 深圳国际研究生院,广东 深圳 518055 
赖长洪 深圳清华大学研究院 生物医用材料及植入器械实验室,广东 深圳 518057;清华大学 机械工程系,北京 100084;清华大学 深圳国际研究生院,广东 深圳 518055 
何孟泽 深圳清华大学研究院 生物医用材料及植入器械实验室,广东 深圳 518057;清华大学 机械工程系,北京 100084;清华大学 深圳国际研究生院,广东 深圳 518055 
何金枚 深圳清华大学研究院 生物医用材料及植入器械实验室,广东 深圳 518057 
刘岚兰 深圳清华大学研究院 生物医用材料及植入器械实验室,广东 深圳 518057 
王松 深圳清华大学研究院 生物医用材料及植入器械实验室,广东 深圳 518057 
刘伟强 深圳清华大学研究院 生物医用材料及植入器械实验室,广东 深圳 518057;清华大学 机械工程系,北京 100084;清华大学 深圳国际研究生院,广东 深圳 518055 
AuthorInstitution
WANG Ruilin Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Guangdong Shenzhen 518057, China;Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;Tsinghua Shenzhen International Graduate School, Tsinghua University, Guangdong Shenzhen 518055, China 
LAI Changhong Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Guangdong Shenzhen 518057, China;Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;Tsinghua Shenzhen International Graduate School, Tsinghua University, Guangdong Shenzhen 518055, China 
HE Mengze Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Guangdong Shenzhen 518057, China;Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;Tsinghua Shenzhen International Graduate School, Tsinghua University, Guangdong Shenzhen 518055, China 
HE Jinmei Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Guangdong Shenzhen 518057, China 
LIU Lanlan Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Guangdong Shenzhen 518057, China 
WANG Song Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Guangdong Shenzhen 518057, China 
LIU Weiqiang Biomechanics and Biotechnology Lab, Research Institute of Tsinghua University in Shenzhen, Guangdong Shenzhen 518057, China;Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China;Tsinghua Shenzhen International Graduate School, Tsinghua University, Guangdong Shenzhen 518055, China 
摘要点击次数:
全文下载次数:
中文摘要:
      导管相关性感染(CRI)作为目前常见的医院获得性感染之一,导致死亡率和发病率增加,极大影响了医疗质量与患者健康,避免导管在植介入人体时产生感染已成为临床共性问题。细菌定植形成的生物膜是造成导管相关感染的主要原因,通过在医用导管表面设计功能性涂层来限制细菌定植及生物膜形成能有效避免感染。本文从防污改性、杀菌改性及防污-杀菌改性3个方面综述了近年来医用导管表面改性策略。防污改性一般通过将亲水的非离子型聚合物(如聚乙二醇、聚乙烯吡咯烷酮)以及两性离子聚合物制备在材料表面防止细菌及蛋白质黏附。杀菌改性根据机制可分为接触灭杀、释放灭杀和多机制联合灭杀,主要通过将杀菌剂接枝或负载在材料表面来赋予表面杀菌能力。防污-杀菌改性主要通过制备复合材料及聚合物刷、构建自适应表面及亲水聚合物负载杀菌剂等方式使表面同时具备防污及杀菌的能力。最后,在上述综述基础上对医用抗菌导管存在的问题进行了分析和展望,以期为制备应用于临床的高性能医用抗菌导管提供参考。
英文摘要:
      Catheter is one of the widely used medical instruments at present, but its materials are mostly hydrophobic polymers, which have no antibacterial properties and are easy to make bacteria adhere to its surface and cause serious infection problems. Catheter-related infection (CRI), as one of the most common nosocomial infections, leads to mortality and morbidity, which greatly affects medical treatment and patients' health. Therefore, it has become a common clinical problem to avoid infection when a catheter is implanted into human body. Biofilm formed by bacterial colonization is the main cause of catheter-related infection. At present, researchers mainly prepare functional coatings on the surface of medical catheters to limit bacterial colonization and inhibit the formation of biofilms, so as to effectively avoid infection. In this paper, surface modification strategies of medical catheters in recent years were summarized, which were mainly carried out from three aspects:antifouling modification, sterilization modification and antifouling-sterilization modification. Antifouling modification was generally done by preparing hydrophilic nonionic polymers (e.g., polyethylene glycol, polyvinylpyrrolidone) and zwitterionic polymers on the material surface. The surface of the catheter material was changed from hydrophobic to hydrophilic to improve the surface lubrication performance. At the same time, it could prevent the adhesion of bacteria, proteins and other substances and inhibit the formation of biofilms, but it had no bactericidal ability. Fungicidal modification was to endow the surface with bactericidal ability by grafting or loading fungicides on the surface of the catheter. According to the mechanism of fungicides, it could be divided into killing, releasing and killing or multi-mechanism combined killing. Killing meant that the surface could kill bacteria on the surface of the catheter, but it was likely to fail under complex conditions. Common fungicides were quaternary ammonium salt, chitosan and antibacterial peptide. Release killing meant that the disinfectant released from the surface loaded with disinfectant could kill the bacteria inside and on the surface of the material, but with the release of disinfectant, it was likely to run out of disinfectant. Common release fungicides were nano-metal, antibiotics and gaseous molecule. Multi-mechanism combined killing referred to the combination of fungicides with multiple killing mechanisms, such as killing and release killing, killing and photothermal killing, etc. By combining fungicides with multiple killing mechanisms, the problems of sterilization surface failure and drug resistance of bacteria could be better avoided, and better antibacterial and anti-biofilm effects could be achieved. Antifouling-bactericidal modification mainly through the preparation of composite materials and polymer brushes and building self-adaptive surface and hydrophilic polymer loaded with fungicides made the surface have both antifouling and bactericidal capabilities in order to achieve better antibacterial and anti-bio-film performance and prolong the time of infection. On this basis, this paper summarized the research progress of medical catheter surface coating in recent years, and looked forward to its existing problems. It is hoped that more and more medical antimicrobial catheters can be used in clinic by simplifying coating preparation steps, conducting more simulated in vivo experiments and clinical experiments, and lengthening the experimental cycle, etc., so that more and more medical antimicrobial catheters can be used in clinic.
查看全文  查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第22664280位访问者    渝ICP备15012534号-3

版权所有:《表面技术》编辑部 2014 surface-techj.com, All Rights Reserved

邮编:400039 电话:023-68792193传真:023-68792396 Email: bmjs@surface-techj.com

渝公网安备 50010702501715号